Ultra thin copper clad steel with high performance cost ratio and
high strength
Copper clad steel belongs to the combination of non-ferrous metal
and steel. It has superior properties in appearance, cost ,
strength and so on. ZEGOTA develop and produce high quality copper
clad steel with leading high strength, low cost and ultrathin clad
metal by virtue of innovative technology, high-end equipment and
high-quality raw materials.
Advantages:
1. Ultra thin: By using the unique clad technology, the
single-layer clad with 0.01mm thickness can be compounded with
0.03mm base metal, the total thickness can be up to 0.05mm, and the
multi-layer clad can be made.
2. High performance cost ratiot: It is low manufacturing cost by clad in physical process and
unique cold rolling technology without extra welding and explosion.
3. High strength: Using unique clad technology and taking advantage
of the high strength of steel, while copper is soft, the
combination of the two can make full use of its advantages, which
clad a special material.
Parameters:
| Clad material | Copper | Copper | Steel | Steel | Copper |
| Steel | Steel | Copper | Copper | Steel |
| Copper | Copper | / | / | Copper |
| Thickness(mm) | 0.01-4.0 | 0.04-4.0 | 0.01-4.0 | 0.01-4.0 | 0.01-4.0 |
| Width(mm) | 5.0-1500 | 5.0-1500 | 5.0-1500 | 5.0-1500 | 5.0-1500 |
| Tensile strength(MPa) | 260-320 | 480-580 | 480-580 | 400-480 | 480-580 |
| Yield strength(MPa) | 200-260 | 300-380 | 300-380 | 340-330 | 300-380 |
| Elongation(%) | ≥37 | ≥15 | ≥15 | ≥15 | ≥15 |
Application:
1. Bullet shell: Copper clad steel is used to replace the shell
made of traditional steel and copper, which not only guarantees the
original performance, but also has the characteristics of corrosion
resistance and good surface lubrication.
2. Electronic connector: There are many gaskets in electronic
components, which are strong and thin. Copper clad steel can meet
the design requirements of various shapes and functions.
3. Kitchen pan: Copper clad steel has good strength and plasticity,
which greatly improves the processing efficiency of products.
Copper has good magnetic conductivity, which can improve the
heating efficiency and uniformity of pots.
