High combination rate copper clad steel clad copper with high
strength and high extensibility
Steel clad copper clad steel belongs to the combination of
non-ferrous metal and carbon steel. It has superior properties in
strength, bending , heat conduction . ZEGOTA uses innovative
technology, high-end equipment and high-quality raw materials to
develop and produce high quality steel clad copper clad steel sheet
with leading high ductility, high combination rate and high
strength clad.
Advantages:
1. High combination rate: We make clad metal by cold rolling
technology, then the bonding rate can improve 30% at least compared
with welding combination and explosion combination.
2. High strength: Using unique combination technology and taking
advantage of the high strength of steel, while copper is soft, the
combination of the two can make full use of its advantages, which
clad a special material.
3. High extensibility: Because copper is soft and excellent
ductility, steel clad copper clad steel with 35% elongation
improvement can be achieved by combining copper and steel together.
Parameters:
| Clad material | Steel | Steel | Steel |
| Copper | Copper | Copper |
| Steel | Steel | Steel |
| Thickness(mm) | 0.01-4.0 | 0.04-4.0 | 0.01-4.0 |
| Width(mm) | 5.0-1500 | 5.0-1500 | 5.0-1500 |
| Tensile strength(MPa) | 260-320 | 480-580 | 480-580 |
| Yield strength(MPa) | 200-260 | 300-380 | 300-380 |
| Elongation(%) | ≥37 | ≥15 | ≥15 |
Application:
1. Military Industry: steel clad copper clad steel clad copper is
used to replace the shell made of traditional steel and copper,
which not only guarantees the original performance, but also has
the characteristics of corrosion resistance and good surface
lubrication.
2. Electronic industry: There are many gaskets in electronic
components, which require strong and thin. Steel clad copper clad
steel clad copper can meet various innovative design requirements.
3. Kitchen utensils: In the manufacture of kitchen utensils, a lot
of extrusion deformation is needed. Steel clad copper clad steel
clad copper has good strength and ductility, which greatly improves
the processing efficiency of products.
