Ultra thin copper clad steel with high strength and high
extensibility
Steel clad copper clad steel belongs to the combination of
non-ferrous metal and steel. It has superior properties in Surface
quality, cost , strength and so on. ZEGOTA develop and produce high
quality Steel clad copper clad steel with leading high strength,
low cost and high Surface quality clad metal by virtue of
innovative technology, high-end equipment and high-quality raw
materials.
Advantages:
1. High surface quality: Good surface roughness and dimensional
consistency can be achieved by using cold rolling technology to
manufacture clad metals and surface quality control technology.
2. High performance cost ratio: It is low manufacturing cost by
clad in physical process and unique cold rolling technology without
extra welding and explosion.
3. High strength: Using unique clad technology and taking advantage
of the high strength of steel, while copper is soft, the
combination of the two can make full use of its advantages include
of the high strength of steel and electric conductivity and
magnetic conductivity of copper.
Parameters:
| Clad material | Copper | Copper | Steel | Steel | Copper |
| Steel | Steel | Copper | Copper | Steel |
| Copper | Copper | / | / | Copper |
| Thickness(mm) | 0.01-4.0 | 0.04-4.0 | 0.01-4.0 | 0.01-4.0 | 0.01-4.0 |
| Width(mm) | 5.0-1500 | 5.0-1500 | 5.0-1500 | 5.0-1500 | 5.0-1500 |
| Tensile strength(MPa) | 260-320 | 480-580 | 480-580 | 400-480 | 480-580 |
| Yield strength(MPa) | 200-260 | 300-380 | 300-380 | 340-330 | 300-380 |
| Elongation(%) | ≥37 | ≥15 | ≥15 | ≥15 | ≥15 |
Application:
1. Military Industry: Copper clad steel is used to replace the
shell made of traditional steel or copper, which not only
guarantees the original performance, but also has the
characteristics of corrosion resistance and good surface
lubrication.
2. Electronic industry: There are many gaskets in electronic
components, which require strength and fine thickness. Copper clad
steel can meet various innovative design requirements.
3. Cookware: During the manufacture of cooking utensils, a lot of
stamping deformation is needed. Copper clad steel materials have
good strength and ductility, which greatly improves the processing
efficiency of products.
