High Bonding Rate Titanium Clad Steel Clad Titanium with High
temperature resistance and light weight
Description:
Titanium clad steel clad Titanium material belongs to the product
of nonferrous metal and steel, which solves the contradiction
between high performance and price. ZEGOTA adopts innovative
technology, high-end equipment and high-quality raw materials to
develop and produce high-quality titanium clad steel materials with
leading ultra-thin, lightweight and high-temperature resistance.
Advantages:
1. High strength: steel has a good quality strength ratio. In the
strength application design, titanium steel composite materials
make full use of the high strength performance of steel.
2. Corrosion resistance: titanium steel composite material is an
ideal material for ships and Marine engineering and is known as
"Marine metal". Due to the formation of stable oxide film on the
surface, titanium steel composite material will not cause
environmental problems caused by metal ion leakage due to corrosion
or erosion.
3. High temperature resistance: titanium has a melting point of
1660 ° c and a boiling point of 3287 ° c. As a composite material,
it can withstand extreme high temperature when surface contact.
Application:
1. Marine engineering: titanium steel has been used in the field of
Marine civil engineering. Titanium basically will not be corroed in
seawater, and titanium metal ions will not be dissolved.
2. Food chemical container: titanium steel composite material has
the characteristics of non-toxic, high temperature resistance,
natural advantages in the production of reaction vessels, heating
melt, low cost suitable for large-scale promotion.
3. Industrial field: the use of titanium high temperature
resistance and non-toxic characteristics, combined with steel with
high strength performance, in the power plant chimney use, to
achieve a lasting, environmentally friendly effect.
Parameter:
| Clad material | Titanium | Titanium |
| Steel | Steel |
| Titanium | / |
| Thickness(mm) | 0.01-4.0 | 0.01-4.0 |
| Width(mm) | 5.0-1500 | 5.0-1500 |
| Tensile strength(Mpa) | 600-850 | 900-1200 |
| Yield strength(Mpa) | 530-790 | 830-1100 |
| Elongation(%) | ≥40 | ≥10 |
